SMC Bathroom Pods
One-piece molded SMC bathroom bases with modular wall panels, flexible configurations and efficient installation for residential, hospitality and construction projects.
Request a QuoteA Flexible Bathroom System Built Around the SMC Base
IWAENG SMC bathroom systems combine a one-piece molded SMC base with modular wall panels to create a practical and durable wet-area solution.
The system can be supplied as a complete bathroom, as an SMC base only, or combined with tempered glass to create a separate shower enclosure.
Bathroom functions can also be configured according to the project. You can choose the functions you actually need, such as shower, toilet, wash basin, or a combination of these.
Key Features of the SMC Bathroom System
Designed for projects where waterproofing, installation efficiency and flexible bathroom layouts are important.
One-Piece Molded SMC Base
The bathroom base is molded as one integrated piece without conventional floor tile joints in the wet area. The surface has a stone-textured anti-slip finish.
Integrated Water Retaining Edge
The base includes an approximately 50 mm raised water-retaining edge and an integrated drainage slope to guide water toward the floor drain.
Modular Wall Panels
SMC wall panels can be combined with the base to form a complete bathroom enclosure. Standard panel widths are 500, 600 and 900 mm.
Flexible Configuration
Configure the bathroom around the functions required by the project instead of using a fixed layout for every application.
Base Only Available
The SMC base can be supplied separately and used as an alternative to a conventional tiled wet-area floor.
Suitable for Renovation
Existing rooms can be converted into bathroom spaces when the required water supply, drainage and electrical points are reserved.
One-Piece Molded SMC Bathroom Base
The SMC base is manufactured as an integrated molded component, creating a continuous wet-area surface without conventional floor tile joints.
The surface has a stone-textured finish designed for everyday bathroom use and provides a warmer, more comfortable feel than many conventional cold hard-surface floors.
- One-piece molded construction
- Stone-textured anti-slip surface
- Approximately 50 mm raised water-retaining edge
- Integrated drainage slope
- Available as a complete bathroom base or base-only solution
Built-In Drainage for the Wet Area
The SMC base is designed with an integrated drainage slope so water can flow toward the lowest point and discharge through the floor drain.
Large-Diameter Floor Drain
The drainage system can use a large-diameter floor drain designed for efficient bathroom wastewater discharge.
The water seal is intended to help reduce sewer odors from entering the bathroom. Actual drainage performance depends on the local plumbing system and installation conditions.
Modular Wall Panels for Flexible Layouts
SMC wall panels are assembled with the bathroom base to create the enclosure. The panel structure is designed for modular installation and can accommodate project-specific openings and service connections.
- Standard widths: 500 / 600 / 900 mm
- Standard heights: 2200 / 2400 mm
- 4 standard colors available
- Custom colors available for larger-volume orders
- Can be combined according to bathroom dimensions
Choose the Bathroom Configuration You Need
Not every project requires the same bathroom functions. IWAENG can configure the SMC system around the actual requirements of the room and project.
Complete SMC Bathroom
Combine the SMC base, wall panels, ceiling and selected sanitary fixtures to create a complete bathroom unit.
SMC Base Only
The SMC base can be supplied separately for projects that already have their own wall finishes or bathroom enclosure.
SMC Base + Glass Shower Room
Instead of SMC wall panels, tempered glass can be used to create an open and modern shower enclosure while retaining the SMC base.
Install a Bathroom Inside an Existing Room
An existing room does not necessarily need to be rebuilt with traditional masonry walls to create a bathroom.
When suitable water supply, drainage and electrical points are reserved, the SMC bathroom system can be installed within the available space.
The exterior of the bathroom enclosure can be finished with a suitable wood or steel frame and clad with gypsum board, wood board or another local finishing material.
- Suitable for renovation and room conversion
- Reserve water supply and drainage points
- Reserve required electrical connections
- External finishing can be adapted to the project
Designed for Efficient On-Site Installation
The modular construction allows the bathroom components to be assembled on site after the necessary building services and installation area have been prepared.
Depending on the project, installation can be carried out by qualified local workers, plumbers and electricians.
*Approximate reference for one bathroom set under suitable site conditions. Actual installation time depends on project layout, local trades and site preparation.
Suitable for Residential and Large-Scale Projects
For hotels, apartments and other multi-unit projects, installation methods can be selected according to site conditions, labor costs and project logistics.
Hotels & Hospitality
Suitable for hotel rooms, serviced apartments and other standardized bathroom applications.
Apartments & Housing
Useful for residential projects where installation speed and repeatable bathroom layouts are important.
Renovation Projects
Can be considered for converting existing rooms into bathroom spaces when service connections can be prepared.
SMC Bathroom Pod Applications
Flexible configurations make the system suitable for a range of residential and commercial projects.
Frequently Asked Questions
Can I buy only the SMC bathroom base?
Yes. The SMC base can be supplied separately. It can be used with existing wall finishes or combined with tempered glass to create a shower enclosure.
Do I need traditional waterproofing for the SMC base?
The one-piece molded SMC base is designed as an integrated wet-area component, including a raised water-retaining edge and drainage structure. For a specific project, the final waterproofing and building-code requirements should be confirmed with the local contractor or authority.
What wall panel sizes are available?
Standard wall panel widths are 500, 600 and 900 mm, with standard heights of 2200 and 2400 mm. Custom requirements can be discussed for specific projects.
Can the bathroom include only a shower?
Yes. The bathroom can be configured according to the functions required. A shower-only configuration, shower plus wash basin, toilet plus wash basin, or a complete bathroom can be considered.
Can the SMC bathroom be installed in an existing room?
Yes, provided the required installation space and building service connections are available. Water supply, drainage and electrical points should be planned before installation.
How many workers are needed for installation?
As a general reference, two workers can install one bathroom set in approximately four hours under suitable site conditions. Actual installation time varies by project.
Looking for a Custom SMC Bathroom Solution?
Send us your bathroom dimensions, floor plan, drawings, photos or a simple sketch. We can review the available space and discuss a suitable SMC bathroom configuration for your project.
Request a Quote